Skip to main content

Course Outline

Accidents often occur when a driver starts a snowmobile but is not prepared to take control of it immediately. To start safely:

  • Point the machine in a safe direction.
  • Position yourself to control the machine when it starts.
  • Set the parking brake.
  • Make sure the throttle is not frozen. It should snap back to the idle position when released.
  • Set the key and the engine stop switch (also sometimes known as a safety switch) to the “on” position.
  • If your engine is cold, choke or prime it.
  • If you have an electric starter, turn the key and release the choke as soon as the engine starts.
  • If your machine has a reverse gear, be sure the snowmobile is in a forward gear before you start off.
  • Allow the engine to warm up, and gradually move the choke to the “off” position. If you have a primer, you may have to pump it a few times to keep the engine running until it is warm.
  • Unit 2 of 6
  • Topic 1 of 5
  • Page 3 of 5