Riding Your Snowmobile
Maneuvering on Different Terrains
Learning to read and anticipate snow conditions and the terrain ahead is crucial. Each type of terrain offers different challenges.
Deep, Loosely Packed Snow
- Snowmobiles sink deeper and don’t produce as much traction.
- If you’re on deep, loose snow, make a wide turn and move to harder-packed snow.
- Remember, deep snow may hide obstacles or other hazards.
Wet, Heavy, or Melting Snow
- Steering may be more difficult in wet snow, so slow your speed down accordingly.
- Melting snow may uncover hazards such as rocks, dips, or holes in the trail that were previously covered.
Hard-Packed Snow Drifts
- After the wind blows snow into drifts and the snow hardens, it may conceal bumps and dips.
- Back injuries can result from riding over these drifts, especially at high speeds.
- When you are approaching a drift, reduce your speed and be alert.
Ice
- Ice presents many of the same handling problems as riding on pavement. Also, spins are common and fast stops are impossible.
- Maintain a slow, steady speed. Don’t speed up or apply the brakes abruptly.
- To stop safely, release the throttle and coast to a stop.
Frozen Bodies of Water
Do not ride on frozen rivers and lakes if you can avoid it, but if you must:
- Scout ahead.
- Go to as high an area of elevation above the lake as possible and use binoculars to look for dark spots on the ice. This indicates slush, water, or deteriorating ice. Do not attempt to cross this ice.
- Watch for small streams flowing on the ice or under it. Even when the surface looks solid, moving water under the ice weakens it from below.
- If you’re in a group, avoid crossing in single file. If the group leader falls through, riders in single file may not be able to stop or maneuver the snowmobile quickly enough to keep from following the leader through the ice.
REMEMBER … If you don’t know, don’t go!
|